performance of concrete with quarry dust as fine aggregate

High Performance Concrete using Quarry dust as Fine aggregate

Concrete containing quarry dust as fine aggregate is promising greater strength, lower permeability and greater density which enable it to provide better resistance to freeze and thaw cycles and durability in adverse environment.

More

Review on Performance of Quarry Dust as Fine Aggregate in ...

Sivakumar and Prakash have reported that 100%replacement of sand with quarry dust for a fine to coarseaggregate ratio of 0.6 in concrete was found to enhance thecompressive strength and elastic modulus. When thequarry dust had high fineness, its usage in the normalconcrete was limited because it increased the water demand.

More

Effect of Quarry Dust on High Performance Concrete

Quarry Dust as full replacement in concrete as possible with proper treatment of Quarry Dust before utilization. Quarry waste fine aggregate was used in presence of silica fume. The overall test results revealed that quarry waste fine aggregate can be utilized in concrete mixtures as a good substitute of natural sand. It is found that the compressive,

More

The Utilization of Quarry Dust as Fine Aggregates in Concrete

distribution close to that of sand. It is also found that utilization of quarry dust as fine aggregates in concrete provides sufficient workability and also the required strength. Utilization of quarry dust will conveniently decrease the demand of natural sand hence help

More

(PDF) Compressive Strength of Concrete Using Lateritic ...

The compressive strength of concrete using quarry dust as fine laterite and quarry dust used in the experiments were those aggregate and mixing with admixture type E, it was found passing sieve (2mm) and retained on sieve (150µm). All that with 70% quarry dust the concrete produced tests were conducted according to the relevant British compared well with normal concrete. He recommended Standard (BS) (eg. BS 1881 [31, 32, 33]). The materials quarry dust

More

Review on Performance of Quarry Dust as Fine Aggregate in ...

Review on Performance of Quarry Dust as Fine Aggregate in Concrete Anup Kumar Pathe1, Pushpendra Kumar Kushwaha2, Jiji M Thomas3 1Student, Department of Civil Engineering, RKDF College of Engineering Bhopal, India 2Assistant Professor, Department of Civil Engineering, RKDF College of Engineering Bhopal, India, 3Assistant Professor, Department of Civil Engineering, RKDF

More

The Utilization of Quarry Dust as Fine Aggregates in Concrete

It is conventional that Sand is being used as fine aggregate in concrete. The major source of sand is river beds which have been extensively used and depleted. This depletion and thus shortage of sand has caused a noticeable increase in the price of sand. Hence we are forced to think of alternative materials. Quarry dust is by product from the extraction of aggregates. The aggregates are ...

More

Effect of Quarry Dust on High Performance Concrete

Keywords - High performance Concrete, Quarry dust, Strength, Workability, Mechanical properties. 1.0 INTRODUCTION Concrete is a widely used material in the world. Based on global usage, it is placed at second position after water. Fine aggregate is an essential component of concrete. The most commonly used fine aggregate is natural river or pit sand. The global consumption of natural sand is ...

More

Analysis of Concrete Made from Quarry Dust - IJERT

cement, fine aggregate, coarse aggregate, quarry dust. The examples were casted for M25 grade of concrete by supplanting the cement 0%, 5%, 10%, 15% and 20% by quarry dust and tested for workability by slump test, compressive strength, flexure strength and split tensile test at the age of 7, 14, 28 and 50 days. It is seen that the strength results represents that concrete casted with in M25 ...

More

Use of Quarry Dust as fine aggregates by Partial ...

Replacement of fine aggregate by quarry dust at partial replace results the increase in strength of concrete. 2. The concept of replacement of natural fine aggregate (sand) by quarry dust may help in many ways such as it is helpful to control environment pollution, erosion of river bank might stop and also the waste quarry material can be utilize. 3. Since sand is much costlier due to ...

More

Study on Compressive Strength of Quarry Dust as Fine ...

28/07/2016  The concept of replacement of natural fine aggregate by quarry dust which is highlighted in the study could boost the consumption of quarry dust generated from quarries. By replacement of quarry dust, the requirement of land fill area can be reduced and can also solve the problem of natural sand scarcity. The availability of sand at low cost as a fine aggregate in concrete is not suitable and ...

More

Introduction to Quarry-Dust as Partial Replacement ...

19/05/2020  quarry dust as fine aggregate: effect on compressive strength , durability and workability of concrete. The experimental study done by R Chandana Sukesh, Katakam Bala Krishna, P.Sri Lakshmi Sai Teja, S.Kanakambara Rao.[6] in which replacement of the sand with quarry dust shows an improvement in the compressive strength of the concrete.

More

(PDF) Compressive Strength of Concrete Using Lateritic ...

The data for 28-day compressive strength of concrete with the proportion of 25% laterite: 75% quarry 4.3 Variation of compressive strength of concrete with age dust, 1:1.5:3 mix and 0.54 water/cement ratio were fitted The relationship between strength and age of by different trend models, namely: linear, polynomial and concrete using lateritic sand and quarry dust as fine logarithmic. The ...

More

Stone Dust in Concrete: Effect on Compressive Strength

Quarry dust can be utilized in concrete mixtures as a good substitute for natural river sand giving higher strength at 50% replacement (Balamurgan et al., 2013). While using crushed stone dust as fine aggregate in concrete it is found that there is increase in compressive, flexural and tensile strength of concrete (Nagpal et al., 2013). It has been observed that 40% replacement of fine ...

More

Effect of quarry rock dust on the flexural strength of ...

01/06/2018  Portland limestone cement, river sand and quarry rock dust both of 2 mm maximum size as fine aggregate, and 14 mm crushed rock coarse aggregate were used for the concrete The particle size distribution and the physical properties of the fine and coarse aggregates are shown in Fig. 1 and Table 1 respectively. The fine and coarse aggregates satisfied the BS EN 12620:2002 + A1:2008

More

Review on Performance of Quarry Dust as Fine Aggregate in ...

Review on Performance of Quarry Dust as Fine Aggregate in Concrete Anup Kumar Pathe1, Pushpendra Kumar Kushwaha2, Jiji M Thomas3 1Student, Department of Civil Engineering, RKDF College of Engineering Bhopal, India 2Assistant Professor, Department of Civil Engineering, RKDF College of Engineering Bhopal, India, 3Assistant Professor, Department of Civil Engineering, RKDF

More

The Utilization of Quarry Dust as Fine Aggregates in Concrete

It is conventional that Sand is being used as fine aggregate in concrete. The major source of sand is river beds which have been extensively used and depleted. This depletion and thus shortage of sand has caused a noticeable increase in the price of sand. Hence we are forced to think of alternative materials. Quarry dust is by product from the extraction of aggregates. The aggregates are ...

More

Use of Quarry Dust as fine aggregates by Partial ...

Replacement of fine aggregate by quarry dust at partial replace results the increase in strength of concrete. 2. The concept of replacement of natural fine aggregate (sand) by quarry dust may help in many ways such as it is helpful to control environment pollution, erosion of river bank might stop and also the waste quarry material can be utilize. 3. Since sand is much costlier due to ...

More

Analysis of Concrete Made from Quarry Dust - IJERT

cement, fine aggregate, coarse aggregate, quarry dust. The examples were casted for M25 grade of concrete by supplanting the cement 0%, 5%, 10%, 15% and 20% by quarry dust and tested for workability by slump test, compressive strength, flexure strength and split tensile test at the age of 7, 14, 28 and 50 days. It is seen that the strength results represents that concrete casted with in M25 ...

More

Effect of quarry rock dust on the flexural strength of ...

01/06/2018  Portland limestone cement, river sand and quarry rock dust both of 2 mm maximum size as fine aggregate, and 14 mm crushed rock coarse aggregate were used for the concrete The particle size distribution and the physical properties of the fine and coarse aggregates are shown in Fig. 1 and Table 1 respectively. The fine and coarse aggregates satisfied the BS EN 12620:2002 + A1:2008

More

BEHAVIOR OF CONCRETE ON REPLACEMENT OF SAND WITH QUARRY ...

QUARRY STONE DUST AS FINE AGGREGATE Venkata Keerthi.B1, J. Sudha Mani2 1M.Tech Student, 2 ... while Jaffar et al investigated the performance of high strength concrete with silica stone dust was a partial replacement of cement. Further, comprehensive tests on beam models are not reported so far. Devi. M et al dealt with the strength and corrosion resistance behavior of various integral type ...

More

Improved Concrete Properties Using Quarry Dust as ...

08/04/2015  2) Quarry dust is used as a fine aggregate in Concrete for paving blocks of good permeability capacity and high grade concrete productions. 3) Quarry dust gives better workability and strength when it is mixed with the ingredients like fly ash, in concrete. VIII. CONCLUSION One of the ways to improving sustainability is to reduce the human consumption of natural resources. In order to

More

Studies on quarry dust as partial replacement of fine ...

05/05/2017  This study initiated to assess the suitability of quarry dust as partial substitute for fine aggregate in concrete. The evaluation is based on parameters such as gradation results, workability, compressive strength and flexural strength. II. SCOPE OF PRESENT STUDY In this study, concrete of M20 grade was obtained and the mixtures were modified by partially replacing natural sand with quarry ...

More

Stone Dust in Concrete: Effect on Compressive Strength

Quarry dust can be utilized in concrete mixtures as a good substitute for natural river sand giving higher strength at 50% replacement (Balamurgan et al., 2013). While using crushed stone dust as fine aggregate in concrete it is found that there is increase in compressive, flexural and tensile strength of concrete (Nagpal et al., 2013). It has been observed that 40% replacement of fine ...

More

Study on the Effect of Quarry Dust on Plastic Shrinkage in ...

11/09/2019  shell concrete properties such as mechanical, bond, durability, structural performance and plastic shrinkage were reported and made available in the literature. However, these properties were studied using conventional river sand as fine aggregate. Since now a day’s river sand is also need an alternative to save its natural resources, quarry dust, M-sand are tried by many researchers both in ...

More

Use of Quarry Dust as fine aggregates by Partial ...

Replacement of fine aggregate by quarry dust at partial replace results the increase in strength of concrete. 2. The concept of replacement of natural fine aggregate (sand) by quarry dust may help in many ways such as it is helpful to control environment pollution, erosion of river bank might stop and also the waste quarry material can be utilize. 3. Since sand is much costlier due to ...

More

A Study on Performance of Crusher Dust in Place of Sand as ...

IllangovanRet.al(2006)3 studied quarry dust as fine aggregate in concrete. Collins R.J et.al (1994)2 studied quarry dust in highway constructions. In the present investigations various percentages of sands such as 10%, 20%, etc., were added to crusher dust particles and the mixes were prepared and tested for compaction and strength to suit as sub-grade and fill materials. 2. MATERIALS AND ...

More

Effect of Quarry Dust on High Performance Concrete

Keywords - High performance Concrete, Quarry dust, Strength, Workability, Mechanical properties. 1.0 INTRODUCTION Concrete is a widely used material in the world. Based on global usage, it is placed at second position after water. Fine aggregate is an essential component of concrete. The most commonly used fine aggregate is natural river or pit sand. The global consumption of natural sand is ...

More

Influence of Fine Aggregate Types on the Performance Self ...

indicated that quarry dust as fine aggregate has highest 28 days compressive strength for all the different water cement ratios. All fine aggregate types have recorded higher strength when the proportion of fine aggregate to total aggregate content is 60%. Offshore sand mixes recorded the lowest shrinkage and also lowest water content to achieve the conformity requirement of self-compacting ...

More

An Experimental Study on Quarry Dust as a Fine Aggregate ...

An Experimental Study on Quarry Dust as a Fine Aggregate for Making a Concrete. D. Sathyapriya 1, G. Alagar Raja 2, K. Raguram 3, S. Elayabarathi 4, M. Arunkumar 5 Asst professor 1Dept of Civil Engineering, Sri Rangathar Institute of Engg and Tech, Coimbatore, Tamilnadu. UG Student 2,3,4,5 Dept of Civil Engineering, Sri Rangathar Institute of Engg and Tech, Coimbatore, Tamilnadu.

More

Stone Dust in Concrete: Effect on Compressive Strength

Quarry dust can be utilized in concrete mixtures as a good substitute for natural river sand giving higher strength at 50% replacement (Balamurgan et al., 2013). While using crushed stone dust as fine aggregate in concrete it is found that there is increase in compressive, flexural and tensile strength of concrete (Nagpal et al., 2013). It has been observed that 40% replacement of fine ...

More

Influence of Quarry Dust on Compressive Strength of

Objectives: In the present study, by-product of stone crushed, quarry dust is replaced as a fine aggregate with 20%, 30%, 40%, 50% replacement.Methods/Analysis: The fine aggregate is being replaced with fine aggregate and the compressive strength is determined for the concrete by testing the sample cube. The properties such as the specific gravity, fineness modulus, moisture content etc. are ...

More

Improved Concrete Properties Using Quarry Dust as ...

08/04/2015  2) Quarry dust is used as a fine aggregate in Concrete for paving blocks of good permeability capacity and high grade concrete productions. 3) Quarry dust gives better workability and strength when it is mixed with the ingredients like fly ash, in concrete. VIII. CONCLUSION One of the ways to improving sustainability is to reduce the human consumption of natural resources. In order to

More

A STUDY OF COMPRESSIVE STRENGTH OF CONCRETE USING QUARRY

Abstract: This research is related to study the compressive strength of concrete using quarry dust as fine aggregate instead of sand. Ratio of cement: sand: rock is 1: 2: 4 (by weight) and at water-cement ratio (w/c) of 0.45. The admixture type E is added for increasing the compressive strength. Without using the admixture, it is found that the compressive strengths are 275, 260, 241 and 234 ...

More

Experimental Study on the Properties of Concrete with ...

high performance concrete made with granite powder as fine aggregate and partial replacement of cement with 7.5% silica fume, 10% fly ash and 10% slag subjected to water curing is conducted for finding the mechanical properties such as compressive strength, split tensile strength, modulus of elasticity, flexural strength and water absorption characteristics of concrete mixtures. The test ...

More